Part number: 17193
Description: 3 x 10 mm²
Cores: 3
Approx. Outer diameter: 14,9 mm
Core Colors: Brown - Black - Grey
Net weight (k: 0,46 kg/m
Type: MarineLine YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 2 = stranded
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Low voltage shipboard power cables with enhanced EMC properties for use in sensitive EMC areas and suitable for Variable Frequency Drive applications. Enhanced shielding properties due to optimized tinned copper wire braid in combination with 100% foil-screen coverage.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 60 mm
Bending radius during installation: 104 mm
Binde: Polyester tape
Capacity: 55 nF/km
Conductor AC resistance at maximum continuous temperature: 2,3 Ohm/km
Conductor dc resistance @ 20°c: 1,83 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 3,85 mm
Diameter over braiding: 12,2 mm
Diameter shield wires: 0,3 mm
Inductance: 0,244 mH/km
Insulation thickness: 0,7 mm
Nominal cross section conductor: 10 mm²
Nominal outer sheath thickness: 1,3 mm
Reel à 1000: (17193H X 1000 / 8713182205805)
Reel à 500: (17193H X 500/20 / 8713182205812)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineLine YOZp EMC 0,6/1 kV - 3x10 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 450 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 2 conductors • Designed for situations that need Electro-Magnetic Interference to be limited to the minimum • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armoring • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Standard trade article: (17193 / 8713182205829)

Part number: 17197
Description: 3 x 25 mm²
Cores: 3
Approx. Outer diameter: 21,1 mm
Core Colors: Brown - Black - Grey
Net weight (k: 0,961 kg/m
Type: MarineLine YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 2 = stranded
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Low voltage shipboard power cables with enhanced EMC properties for use in sensitive EMC areas and suitable for Variable Frequency Drive applications. Enhanced shielding properties due to optimized tinned copper wire braid in combination with 100% foil-screen coverage.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 85 mm
Bending radius during installation: 150 mm
Binde: Polyester tape
Capacity: 65 nF/km
Conductor AC resistance at maximum continuous temperature: 0,91 Ohm/km
Conductor dc resistance @ 20°c: 0,727 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colour
Diameter conductor: 6,3 mm
Diameter over braiding: 18,2 mm
Diameter shield wires: 0,3 mm
Inductance: 0,223 mH/km
Insulation thickness: 0,9 mm
Nominal cross section conductor: 25 mm²
Nominal outer sheath thickness: 1,5 mm
Reel à 1000: (17197H X 1000 / 8713182205836)
Reel à 500: (17197H X 500/20 / 8713182205843)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineLine YOZp EMC 0,6/1 kV - 3x25 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 1.125 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 2 conductors • Designed for situations that need Electro-Magnetic Interference to be limited to the minimum • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armoring • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Standard trade article: (17197 / 8713182205850)

Part number: 17197
Description: 3 x 25 mm²
Cores: 3
Approx. Outer diameter: 21,1 mm
Core Colors: Brown - Black - Grey
Net weight (k: 0,961 kg/m
Type: MarineLine YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 2 = stranded
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Low voltage shipboard power cables with enhanced EMC properties for use in sensitive EMC areas and suitable for Variable Frequency Drive applications. Enhanced shielding properties due to optimized tinned copper wire braid in combination with 100% foil-screen coverage.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 85 mm
Bending radius during installation: 150 mm
Binde: Polyester tape
Capacity: 65 nF/km
Conductor AC resistance at maximum continuous temperature: 0,91 Ohm/km
Conductor dc resistance @ 20°c: 0,727 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colour
Diameter conductor: 6,3 mm
Diameter over braiding: 18,2 mm
Diameter shield wires: 0,3 mm
Inductance: 0,223 mH/km
Insulation thickness: 0,9 mm
Nominal cross section conductor: 25 mm²
Nominal outer sheath thickness: 1,5 mm
Reel à 1000: (17197H X 1000 / 8713182205836)
Reel à 500: (17197H X 500/20 / 8713182205843)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineLine YOZp EMC 0,6/1 kV - 3x25 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 1.125 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 2 conductors • Designed for situations that need Electro-Magnetic Interference to be limited to the minimum • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armoring • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Standard trade article: (17197 / 8713182205850)

Part number: 17344
Description: 4 G 1,5 mm²
Cores: 4
Approx. Outer diameter: 9,7 mm
Core Colors: Green/Yellow - Brown - Black - Grey
Net weight (k: 0,153 kg/m
Type: MarineLine YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 2 = stranded
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Low voltage shipboard power cables with enhanced EMC properties for use in sensitive EMC areas and suitable for Variable Frequency Drive applications. Enhanced shielding properties due to optimized tinned copper wire braid in combination with 100% foil-screen coverage.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 40 mm
Bending radius during installation: 70 mm
Binde: Polyester tape
Capacity: 37 nF/km
Conductor AC resistance at maximum continuous temperature: 15 Ohm/km
Conductor dc resistance @ 20°c: 12,1 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: HD 308: Green/Yellow option 4a
Diameter conductor: 1,56 mm
Diameter over braiding: 7,5 mm
Diameter shield wires: 0,2 mm
Inductance: 0,307 mH/km
Insulation thickness: 0,7 mm
Nominal cross section conductor: 1,5 mm²
Nominal outer sheath thickness: 1,1 mm
Protective conductor: Yes
Reel à 1000: (17344H X 1000/30 / 8713182242671)
Reel à 500: (17344H X 500/20 / 8713182242688)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineLine YOZp EMC 0,6/1 kV - 4G1,5 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 90 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 2 conductors • Designed for situations that need Electro-Magnetic Interference to be limited to the minimum • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armoring • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Standard trade article: (17344 / 8713182242664)

Part number: 17344
Description: 4 G 1,5 mm²
Cores: 4
Approx. Outer diameter: 9,7 mm
Core Colors: Green/Yellow - Brown - Black - Grey
Net weight (k: 0,153 kg/m
Type: MarineLine YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 2 = stranded
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Low voltage shipboard power cables with enhanced EMC properties for use in sensitive EMC areas and suitable for Variable Frequency Drive applications. Enhanced shielding properties due to optimized tinned copper wire braid in combination with 100% foil-screen coverage.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 40 mm
Bending radius during installation: 70 mm
Binde: Polyester tape
Capacity: 37 nF/km
Conductor AC resistance at maximum continuous temperature: 15 Ohm/km
Conductor dc resistance @ 20°c: 12,1 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: HD 308: Green/Yellow option 4a
Diameter conductor: 1,56 mm
Diameter over braiding: 7,5 mm
Diameter shield wires: 0,2 mm
Inductance: 0,307 mH/km
Insulation thickness: 0,7 mm
Nominal cross section conductor: 1,5 mm²
Nominal outer sheath thickness: 1,1 mm
Protective conductor: Yes
Reel à 1000: (17344H X 1000/30 / 8713182242671)
Reel à 500: (17344H X 500/20 / 8713182242688)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineLine YOZp EMC 0,6/1 kV - 4G1,5 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 90 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 2 conductors • Designed for situations that need Electro-Magnetic Interference to be limited to the minimum • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armoring • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Standard trade article: (17344 / 8713182242664)

Part number: 17184
Description: 4 G 16 mm²
Cores: 4
Approx. Outer diameter: 18,6 mm
Core Colors: Green/Yellow - Brown - Black - Grey
Net weight (k: 0,823 kg/m
Type: MarineLine YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 2 = stranded
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Low voltage shipboard power cables with enhanced EMC properties for use in sensitive EMC areas and suitable for Variable Frequency Drive applications. Enhanced shielding properties due to optimized tinned copper wire braid in combination with 100% foil-screen coverage.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 75 mm
Bending radius during installation: 130 mm
Binde: Polyester tape
Capacity: 68 nF/km
Conductor AC resistance at maximum continuous temperature: 1,4 Ohm/km
Conductor dc resistance @ 20°c: 1,15 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colour
Diameter conductor: 4,85 mm
Diameter over braiding: 15,8 mm
Diameter shield wires: 0,3 mm
Inductance: 0,227 mH/km
Insulation thickness: 0,7 mm
Nominal cross section conductor: 16 mm²
Nominal outer sheath thickness: 1,4 mm
Protective conductor: Yes
Reel à 1000: (17184H X 1000 / 8713182241629)
Reel à 500: (17184H X 500/20 / 8713182241636)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineLine YOZp EMC 0,6/1 kV - 4G16 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 960 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 2 conductors • Designed for situations that need Electro-Magnetic Interference to be limited to the minimum • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armoring • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Standard trade article: (17184 / 8713182241612)

Part number: 17184
Description: 4 G 16 mm²
Cores: 4
Approx. Outer diameter: 18,6 mm
Core Colors: Green/Yellow - Brown - Black - Grey
Net weight (k: 0,823 kg/m
Type: MarineLine YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 2 = stranded
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Low voltage shipboard power cables with enhanced EMC properties for use in sensitive EMC areas and suitable for Variable Frequency Drive applications. Enhanced shielding properties due to optimized tinned copper wire braid in combination with 100% foil-screen coverage.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 75 mm
Bending radius during installation: 130 mm
Binde: Polyester tape
Capacity: 68 nF/km
Conductor AC resistance at maximum continuous temperature: 1,4 Ohm/km
Conductor dc resistance @ 20°c: 1,15 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colour
Diameter conductor: 4,85 mm
Diameter over braiding: 15,8 mm
Diameter shield wires: 0,3 mm
Inductance: 0,227 mH/km
Insulation thickness: 0,7 mm
Nominal cross section conductor: 16 mm²
Nominal outer sheath thickness: 1,4 mm
Protective conductor: Yes
Reel à 1000: (17184H X 1000 / 8713182241629)
Reel à 500: (17184H X 500/20 / 8713182241636)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineLine YOZp EMC 0,6/1 kV - 4G16 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 960 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 2 conductors • Designed for situations that need Electro-Magnetic Interference to be limited to the minimum • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armoring • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Standard trade article: (17184 / 8713182241612)

Part number: 17345
Description: 4 G 2,5 mm²
Cores: 4
Approx. Outer diameter: 10,7 mm
Core Colors: Green/Yellow - Brown - Black - Grey
Net weight (k: 0,201 kg/m
Type: MarineLine YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 2 = stranded
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Low voltage shipboard power cables with enhanced EMC properties for use in sensitive EMC areas and suitable for Variable Frequency Drive applications. Enhanced shielding properties due to optimized tinned copper wire braid in combination with 100% foil-screen coverage.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 44 mm
Bending radius during installation: 76 mm
Binde: Polyester tape
Capacity: 44 nF/km
Conductor AC resistance at maximum continuous temperature: 9,3 Ohm/km
Conductor dc resistance @ 20°c: 7,41 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 2,04 mm
Diameter over braiding: 8,6 mm
Diameter shield wires: 0,2 mm
Inductance: 0,279 mH/km
Insulation thickness: 0,7 mm
Nominal cross section conductor: 2,5 mm²
Nominal outer sheath thickness: 1,1 mm
Protective conductor: Yes
Reel à 1000: (17345H X 1000/30 / 8713182242732)
Reel à 500: (17345H X 500/20 / 8713182242749)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineLine YOZp EMC 0,6/1 kV - 4G2,5 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 150 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 2 conductors • Designed for situations that need Electro-Magnetic Interference to be limited to the minimum • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armoring • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Standard trade article: (17345 / 8713182242725)

Part number: 17345
Description: 4 G 2,5 mm²
Cores: 4
Approx. Outer diameter: 10,7 mm
Core Colors: Green/Yellow - Brown - Black - Grey
Net weight (k: 0,201 kg/m
Type: MarineLine YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 2 = stranded
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Low voltage shipboard power cables with enhanced EMC properties for use in sensitive EMC areas and suitable for Variable Frequency Drive applications. Enhanced shielding properties due to optimized tinned copper wire braid in combination with 100% foil-screen coverage.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 44 mm
Bending radius during installation: 76 mm
Binde: Polyester tape
Capacity: 44 nF/km
Conductor AC resistance at maximum continuous temperature: 9,3 Ohm/km
Conductor dc resistance @ 20°c: 7,41 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 2,04 mm
Diameter over braiding: 8,6 mm
Diameter shield wires: 0,2 mm
Inductance: 0,279 mH/km
Insulation thickness: 0,7 mm
Nominal cross section conductor: 2,5 mm²
Nominal outer sheath thickness: 1,1 mm
Protective conductor: Yes
Reel à 1000: (17345H X 1000/30 / 8713182242732)
Reel à 500: (17345H X 500/20 / 8713182242749)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineLine YOZp EMC 0,6/1 kV - 4G2,5 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 150 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 2 conductors • Designed for situations that need Electro-Magnetic Interference to be limited to the minimum • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armoring • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Standard trade article: (17345 / 8713182242725)

Part number: 17436
Description: 3 x 25 mm²
Cores: 3
Approx. Outer diameter: 26,6 mm
Core Colors: Brown - Black - Grey
Net weight (k: 1,151 kg/m
Type: MarineLine YOZp EMC 1,8/3 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 2 = stranded
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 1,8 kV
Nominal voltage U: 3 kV
Test voltage: 6,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Low voltage shipboard power cables with enhanced EMC properties for use in sensitive EMC areas and suitable for Variable Frequency Drive applications. Enhanced shielding properties due to optimized tinned copper wire braid in combination with 100% foil-screen coverage.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 106 mm
Bending radius during installation: 186 mm
Binde: Polyester tape
Capacity: 65 nF/km
Conductor AC resistance at maximum continuous temperature: 0,91 Ohm/km
Conductor dc resistance @ 20°c: 0,727 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 6,3 mm
Diameter over braiding: 23,1 mm
Diameter shield wires: 0,3 mm
Inductance: 0,223 mH/km
Insulation thickness: 2 mm
Nominal cross section conductor: 25 mm²
Nominal outer sheath thickness: 1,7 mm
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineLine YOZp EMC 1,8/3 kV - 3x25 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 1.125 N
Characteristics: • Class 2 conductors • Designed for situations that need Electro-Magnetic Interference to be limited to the minimum • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armoring • Different colour outer sheaths, other than black, available on request
Conductor coding in accordance with hd 308 s2: Yes
Minimum order: standard trade article: 1000 MTR
Standard trade article: (17436 / 8713182397098)

Part number: 17436
Description: 3 x 25 mm²
Cores: 3
Approx. Outer diameter: 26,6 mm
Core Colors: Brown - Black - Grey
Net weight (k: 1,151 kg/m
Type: MarineLine YOZp EMC 1,8/3 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 2 = stranded
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 1,8 kV
Nominal voltage U: 3 kV
Test voltage: 6,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Low voltage shipboard power cables with enhanced EMC properties for use in sensitive EMC areas and suitable for Variable Frequency Drive applications. Enhanced shielding properties due to optimized tinned copper wire braid in combination with 100% foil-screen coverage.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 106 mm
Bending radius during installation: 186 mm
Binde: Polyester tape
Capacity: 65 nF/km
Conductor AC resistance at maximum continuous temperature: 0,91 Ohm/km
Conductor dc resistance @ 20°c: 0,727 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 6,3 mm
Diameter over braiding: 23,1 mm
Diameter shield wires: 0,3 mm
Inductance: 0,223 mH/km
Insulation thickness: 2 mm
Nominal cross section conductor: 25 mm²
Nominal outer sheath thickness: 1,7 mm
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineLine YOZp EMC 1,8/3 kV - 3x25 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 1.125 N
Characteristics: • Class 2 conductors • Designed for situations that need Electro-Magnetic Interference to be limited to the minimum • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armoring • Different colour outer sheaths, other than black, available on request
Conductor coding in accordance with hd 308 s2: Yes
Minimum order: standard trade article: 1000 MTR
Standard trade article: (17436 / 8713182397098)

Part number: 17434
Description: 3 x 10/10 mm²
Cores: 3
Approx. Outer diameter: 21 mm
Core Colors: Brown - Black - Grey
Net weight (k: 0,63 kg/m
Type: MarineLine YOZp EMC 1,8/3 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 2 = stranded
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 1,8 kV
Nominal voltage U: 3 kV
Test voltage: 6,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Low voltage shipboard power cables with enhanced EMC properties for use in sensitive EMC areas and suitable for Variable Frequency Drive applications. Enhanced shielding properties due to optimized tinned copper wire braid in combination with 100% foil-screen coverage.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 84 mm
Bending radius during installation: 147 mm
Binde: Polyester tape
Capacity: 55 nF/km
Conductor AC resistance at maximum continuous temperature: 2,3 Ohm/km
Conductor dc resistance @ 20°c: 1,83 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 3,85 mm
Diameter over braiding: 18 mm
Diameter shield wires: 0,3 mm
Inductance: 0,244 mH/km
Insulation thickness: 2 mm
Nominal cross section conductor: 10 mm²
Nominal earthscreen cross section: 10 mm²
Nominal outer sheath thickness: 1,5 mm
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineLine YOZp EMC 1,8/3 kV - 3x10/10 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 450 N
Characteristics: • Class 2 conductors • Designed for situations that need Electro-Magnetic Interference to be limited to the minimum • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armoring • Different colour outer sheaths, other than black, available on request
Conductor coding in accordance with hd 308 s2: Yes
Minimum order: standard trade article: 1000 MTR
Standard trade article: (17434 / 8713182397074)

Part number: 17434
Description: 3 x 10/10 mm²
Cores: 3
Approx. Outer diameter: 21 mm
Core Colors: Brown - Black - Grey
Net weight (k: 0,63 kg/m
Type: MarineLine YOZp EMC 1,8/3 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 2 = stranded
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 1,8 kV
Nominal voltage U: 3 kV
Test voltage: 6,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Low voltage shipboard power cables with enhanced EMC properties for use in sensitive EMC areas and suitable for Variable Frequency Drive applications. Enhanced shielding properties due to optimized tinned copper wire braid in combination with 100% foil-screen coverage.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 84 mm
Bending radius during installation: 147 mm
Binde: Polyester tape
Capacity: 55 nF/km
Conductor AC resistance at maximum continuous temperature: 2,3 Ohm/km
Conductor dc resistance @ 20°c: 1,83 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 3,85 mm
Diameter over braiding: 18 mm
Diameter shield wires: 0,3 mm
Inductance: 0,244 mH/km
Insulation thickness: 2 mm
Nominal cross section conductor: 10 mm²
Nominal earthscreen cross section: 10 mm²
Nominal outer sheath thickness: 1,5 mm
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineLine YOZp EMC 1,8/3 kV - 3x10/10 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 450 N
Characteristics: • Class 2 conductors • Designed for situations that need Electro-Magnetic Interference to be limited to the minimum • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armoring • Different colour outer sheaths, other than black, available on request
Conductor coding in accordance with hd 308 s2: Yes
Minimum order: standard trade article: 1000 MTR
Standard trade article: (17434 / 8713182397074)

Part number: 17435
Description: 3 x 16 mm²
Cores: 3
Approx. Outer diameter: 23,3 mm
Core Colors: Brown - Black - Grey
Net weight (k: 0,834 kg/m
Type: MarineLine YOZp EMC 1,8/3 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 2 = stranded
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 1,8 kV
Nominal voltage U: 3 kV
Test voltage: 6,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Low voltage shipboard power cables with enhanced EMC properties for use in sensitive EMC areas and suitable for Variable Frequency Drive applications. Enhanced shielding properties due to optimized tinned copper wire braid in combination with 100% foil-screen coverage.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 96 mm
Bending radius during installation: 168 mm
Binde: Polyester tape
Capacity: 61 nF/km
Conductor AC resistance at maximum continuous temperature: 1,4 Ohm/km
Conductor dc resistance @ 20°c: 1,15 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 4,85 mm
Diameter over braiding: 20,1 mm
Diameter shield wires: 0,3 mm
Inductance: 0,227 mH/km
Insulation thickness: 2 mm
Nominal cross section conductor: 16 mm²
Nominal outer sheath thickness: 1,6 mm
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineLine YOZp EMC 1,8/3 kV - 3x16 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 720 N
Characteristics: • Class 2 conductors • Designed for situations that need Electro-Magnetic Interference to be limited to the minimum • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armoring • Different colour outer sheaths, other than black, available on request
Conductor coding in accordance with hd 308 s2: Yes
Minimum order: standard trade article: 1000 MTR
Standard trade article: (17435 / 8713182397081)

Part number: 17435
Description: 3 x 16 mm²
Cores: 3
Approx. Outer diameter: 23,3 mm
Core Colors: Brown - Black - Grey
Net weight (k: 0,834 kg/m
Type: MarineLine YOZp EMC 1,8/3 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 2 = stranded
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 1,8 kV
Nominal voltage U: 3 kV
Test voltage: 6,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Low voltage shipboard power cables with enhanced EMC properties for use in sensitive EMC areas and suitable for Variable Frequency Drive applications. Enhanced shielding properties due to optimized tinned copper wire braid in combination with 100% foil-screen coverage.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 96 mm
Bending radius during installation: 168 mm
Binde: Polyester tape
Capacity: 61 nF/km
Conductor AC resistance at maximum continuous temperature: 1,4 Ohm/km
Conductor dc resistance @ 20°c: 1,15 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 4,85 mm
Diameter over braiding: 20,1 mm
Diameter shield wires: 0,3 mm
Inductance: 0,227 mH/km
Insulation thickness: 2 mm
Nominal cross section conductor: 16 mm²
Nominal outer sheath thickness: 1,6 mm
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineLine YOZp EMC 1,8/3 kV - 3x16 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 720 N
Characteristics: • Class 2 conductors • Designed for situations that need Electro-Magnetic Interference to be limited to the minimum • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armoring • Different colour outer sheaths, other than black, available on request
Conductor coding in accordance with hd 308 s2: Yes
Minimum order: standard trade article: 1000 MTR
Standard trade article: (17435 / 8713182397081)

Part number: 26109
Description: 12 x 1,5 mm2
Cores: 12
Approx. Outer diameter: 17.1 mm
Net weight (k: 0,424 kg/m
Type: MarineLine YOZp FR 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Cu
Conductor category: Class 2 = stranded
Core insulation: Mica + XLPE
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, in movement: -20 / 70 °C
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0.6 kV
Nominal voltage U: 1 kV
Test voltage: 3500 V
Colour outer sheath: Orange
Product group: Shipboard low voltage cable
Application: Fire resistant armoured, lightweight, reduced diameter low voltage cables for power and lighting applications in all ship areas where extra mechanical and EMC protection is needed. The sheath material has excellent abrasion resistance properties and can be stripped easily with the ripcord.
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 68 mm
Bending radius during installation: 120 mm
Binde: Polyester tape
Conductor AC resistance at maximum continuous temperature: 15 Ohm/km
Conductor dc resistance @ 20°c: 12.1 Ohm/km
Construction outer shield: tinned copper braiding
Core identification: HD 308 S2
Core lay-up: Concentric layers
Diameter conductor: 1.75 mm
Diameter over braiding: 14.3 mm
Diameter shield wires: 0.3 mm
Inductance: 0.307 mH/km
Insulation integrity in accordance with iec: Yes
Insulation thickness: 0.7 mm
Nominal cross section conductor: 1.5 mm²
Nominal outer sheath thickness: 1.4 mm
Reel à 1: (26109 / 8713182106485)
Reel à 1000: (26109H X 1000/30 / 8713182106454)
Reel à 500: (26109H X 500/20 / 8713182106478)
Screening: Yes
Series: Shipboard cable
Shape of conductor: Round
Sheath marking: {Length} TKF - 12X1,5 - 0,6/1 kV - CS 90 - mbzh - MarineLine YOZp FR HALOGEN FREE - FIRE RESISTANT {Batch}
Standardization conductor material: IEC 60228
Standardization sheath material: IEC 60092-360
Tensile load: 270 N

Part number: 26109
Description: 12 x 1,5 mm2
Cores: 12
Approx. Outer diameter: 17.1 mm
Net weight (k: 0,424 kg/m
Type: MarineLine YOZp FR 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Cu
Conductor category: Class 2 = stranded
Core insulation: Mica + XLPE
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, in movement: -20 / 70 °C
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0.6 kV
Nominal voltage U: 1 kV
Test voltage: 3500 V
Colour outer sheath: Orange
Product group: Shipboard low voltage cable
Application: Fire resistant armoured, lightweight, reduced diameter low voltage cables for power and lighting applications in all ship areas where extra mechanical and EMC protection is needed. The sheath material has excellent abrasion resistance properties and can be stripped easily with the ripcord.
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 68 mm
Bending radius during installation: 120 mm
Binde: Polyester tape
Conductor AC resistance at maximum continuous temperature: 15 Ohm/km
Conductor dc resistance @ 20°c: 12.1 Ohm/km
Construction outer shield: tinned copper braiding
Core identification: HD 308 S2
Core lay-up: Concentric layers
Diameter conductor: 1.75 mm
Diameter over braiding: 14.3 mm
Diameter shield wires: 0.3 mm
Inductance: 0.307 mH/km
Insulation integrity in accordance with iec: Yes
Insulation thickness: 0.7 mm
Nominal cross section conductor: 1.5 mm²
Nominal outer sheath thickness: 1.4 mm
Reel à 1: (26109 / 8713182106485)
Reel à 1000: (26109H X 1000/30 / 8713182106454)
Reel à 500: (26109H X 500/20 / 8713182106478)
Screening: Yes
Series: Shipboard cable
Shape of conductor: Round
Sheath marking: {Length} TKF - 12X1,5 - 0,6/1 kV - CS 90 - mbzh - MarineLine YOZp FR HALOGEN FREE - FIRE RESISTANT {Batch}
Standardization conductor material: IEC 60228
Standardization sheath material: IEC 60092-360
Tensile load: 270 N

Part number: 26183
Description: 21 x 2,5 mm2
Cores: 21
Approx. Outer diameter: 25.2 mm
Net weight (k: 0,922 kg/m
Type: MarineLine YOZp FR 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Cu
Conductor category: Class 2 = stranded
Core insulation: Mica + XLPE
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, in movement: -20 / 70 °C
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0.6 kV
Nominal voltage U: 1 kV
Test voltage: 3500 V
Colour outer sheath: Orange
Product group: Shipboard low voltage cable
Application: Fire resistant armoured, lightweight, reduced diameter low voltage cables for power and lighting applications in all ship areas where extra mechanical and EMC protection is needed. The sheath material has excellent abrasion resistance properties and can be stripped easily with the ripcord.
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 102 mm
Bending radius during installation: 151 mm
Binde: Polyester tape
Conductor AC resistance at maximum continuous temperature: 9.3 Ohm/km
Conductor dc resistance @ 20°c: 7.41 Ohm/km
Construction outer shield: tinned copper braiding
Core identification: HD 308 S2
Core lay-up: Concentric layers
Diameter conductor: 2.04 mm
Diameter over braiding: 21.8 mm
Diameter shield wires: 0.3 mm
Inductance: 0.279 mH/km
Insulation integrity in accordance with iec: Yes
Insulation thickness: 0.7 mm
Nominal cross section conductor: 2.5 mm²
Nominal outer sheath thickness: 1.7 mm
Reel à 1: (26183 / 8713182233051)
Reel à 1000: (26183H X 1000/30 / 8713182233037)
Reel à 500: (26183H X 500/20 / 8713182233044)
Screening: Yes
Series: Shipboard cable
Shape of conductor: Round
Sheath marking: {Length} TKF - 21X2,5 - 0,6/1 kV - CS 90 - mbzh - MarineLine YOZp FR HALOGEN FREE - FIRE RESISTANT {Batch}
Standardization conductor material: IEC 60228
Standardization sheath material: IEC 60092-360
Tensile load: 788 N

Part number: 26183
Description: 21 x 2,5 mm2
Cores: 21
Approx. Outer diameter: 25.2 mm
Net weight (k: 0,922 kg/m
Type: MarineLine YOZp FR 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Cu
Conductor category: Class 2 = stranded
Core insulation: Mica + XLPE
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, in movement: -20 / 70 °C
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0.6 kV
Nominal voltage U: 1 kV
Test voltage: 3500 V
Colour outer sheath: Orange
Product group: Shipboard low voltage cable
Application: Fire resistant armoured, lightweight, reduced diameter low voltage cables for power and lighting applications in all ship areas where extra mechanical and EMC protection is needed. The sheath material has excellent abrasion resistance properties and can be stripped easily with the ripcord.
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 102 mm
Bending radius during installation: 151 mm
Binde: Polyester tape
Conductor AC resistance at maximum continuous temperature: 9.3 Ohm/km
Conductor dc resistance @ 20°c: 7.41 Ohm/km
Construction outer shield: tinned copper braiding
Core identification: HD 308 S2
Core lay-up: Concentric layers
Diameter conductor: 2.04 mm
Diameter over braiding: 21.8 mm
Diameter shield wires: 0.3 mm
Inductance: 0.279 mH/km
Insulation integrity in accordance with iec: Yes
Insulation thickness: 0.7 mm
Nominal cross section conductor: 2.5 mm²
Nominal outer sheath thickness: 1.7 mm
Reel à 1: (26183 / 8713182233051)
Reel à 1000: (26183H X 1000/30 / 8713182233037)
Reel à 500: (26183H X 500/20 / 8713182233044)
Screening: Yes
Series: Shipboard cable
Shape of conductor: Round
Sheath marking: {Length} TKF - 21X2,5 - 0,6/1 kV - CS 90 - mbzh - MarineLine YOZp FR HALOGEN FREE - FIRE RESISTANT {Batch}
Standardization conductor material: IEC 60228
Standardization sheath material: IEC 60092-360
Tensile load: 788 N

Part number: 26101
Description: 2 x 1,5 mm2
Cores: 2
Approx. Outer diameter: 9.2 mm
Net weight (k: 0,108 kg/m
Type: MarineLine YOZp FR 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Cu
Conductor category: Class 2 = stranded
Core insulation: Mica + XLPE
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, in movement: -20 / 70 °C
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0.6 kV
Nominal voltage U: 1 kV
Test voltage: 3500 V
Colour outer sheath: Orange
Product group: Shipboard low voltage cable
Application: Fire resistant armoured, lightweight, reduced diameter low voltage cables for power and lighting applications in all ship areas where extra mechanical and EMC protection is needed. The sheath material has excellent abrasion resistance properties and can be stripped easily with the ripcord.
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 37 mm
Bending radius during installation: 64 mm
Binde: Polyester tape
Capacity: 55 nF/km
Conductor AC resistance at maximum continuous temperature: 15 Ohm/km
Conductor dc resistance @ 20°c: 12.1 Ohm/km
Construction outer shield: tinned copper braiding
Core identification: HD 308 S2
Core lay-up: Concentric layers
Diameter conductor: 1.75 mm
Diameter over braiding: 7 mm
Diameter shield wires: 0.2 mm
Inductance: 0.307 mH/km
Insulation integrity in accordance with iec: Yes
Insulation thickness: 0.7 mm
Nominal cross section conductor: 1.5 mm²
Nominal outer sheath thickness: 1.1 mm
Reel à 1: (26101 / 8713182106379)
Reel à 1000: (26101H X 1000/30 / 8713182106348)
Reel à 500: (26101H X 500/20 / 8713182106362)
Screening: Yes
Series: Shipboard cable
Shape of conductor: Round
Sheath marking: {Length} TKF - 2X1,5 - 0,6/1 kV - CS 90 - mbzh - MarineLine YOZp FR HALOGEN FREE - FIRE RESISTANT {Batch}
Standardization conductor material: IEC 60228
Standardization sheath material: IEC 60092-360
Tensile load: 45 N