Part number: 55903
Description: 3 x 120 mm² + 3 G 25 mm²
Cores: 3
Approx. Outer diameter: 49,9 mm
Core Colors: Brown - black - grey - green / yellow - green / yellow - green / yellow
Net weight (k: 6,172 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 390 mm
Bending radius during installation: 585 mm
Binde: FRNC filler
Capacity: 87 nF/km
Conductor AC resistance at maximum continuous temperature: 0,19 Ohm/km
Conductor dc resistance @ 20°c: 0,161 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 14 mm
Diameter over braiding: 43,5 mm
Diameter shield wires: 0,4 mm
Inductance: 0,192 mH/km
Insulation thickness: 1,2 mm
Nominal cross section conductor: 120 mm²
Nominal outer sheath thickness: 2,5 mm
Protective conductor: Yes
Reel à 1000: (55903H X 1000 / 8713182255367)
Reel à 500: (55903H X 500/20 / 8713182255374)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x120+3G25 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 5.400 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 2 PCE
Minimum order: standard trade article: 1000 MTR
Nominal cross section pe conductor: 25 mm²
Nominal equivalent cross section of reinforcement: 35 mm²
Number of pe conductors: 3
Standard trade article: (55903 / 8713182255350)

Part number: 17209
Description: 3 x 185 mm²
Cores: 3
Approx. Outer diameter: 53,7 mm
Core Colors: Brown - Black - Grey
Net weight (k: 7,545 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 215 mm
Bending radius during installation: 376 mm
Binde: FRNC filler
Capacity: 90 nF/km
Conductor AC resistance at maximum continuous temperature: 0,124 Ohm/km
Conductor dc resistance @ 20°c: 0,106 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 17 mm
Diameter over braiding: 48,3 mm
Diameter shield wires: 0,4 mm
Inductance: 0,192 mH/km
Insulation thickness: 1,6 mm
Nominal cross section conductor: 185 mm²
Nominal outer sheath thickness: 2,7 mm
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x185 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 8.325 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: standard trade article: 1000 MTR
Standard trade article: (17209 / 8713182256609)

Part number: 17209
Description: 3 x 185 mm²
Cores: 3
Approx. Outer diameter: 53,7 mm
Core Colors: Brown - Black - Grey
Net weight (k: 7,545 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 215 mm
Bending radius during installation: 376 mm
Binde: FRNC filler
Capacity: 90 nF/km
Conductor AC resistance at maximum continuous temperature: 0,124 Ohm/km
Conductor dc resistance @ 20°c: 0,106 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 17 mm
Diameter over braiding: 48,3 mm
Diameter shield wires: 0,4 mm
Inductance: 0,192 mH/km
Insulation thickness: 1,6 mm
Nominal cross section conductor: 185 mm²
Nominal outer sheath thickness: 2,7 mm
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x185 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 8.325 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: standard trade article: 1000 MTR
Standard trade article: (17209 / 8713182256609)

Part number: 17379
Description: 3 x 70 mm² + 3 G 16 mm²
Cores: 3
Approx. Outer diameter: 40,5 mm
Core Colors: Brown - black - grey - green / yellow - green / yellow - green / yellow
Net weight (k: 3,903 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 324 mm
Bending radius during installation: 486 mm
Binde: FRNC filler
Capacity: 73 nF/km
Conductor AC resistance at maximum continuous temperature: 0,34 Ohm/km
Conductor dc resistance @ 20°c: 0,272 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 10,6 mm
Diameter over braiding: 35,9 mm
Diameter shield wires: 0,4 mm
Inductance: 0,2 mH/km
Insulation thickness: 1,1 mm
Nominal cross section conductor: 70 mm²
Nominal outer sheath thickness: 2,2 mm
Protective conductor: Yes
Reel à 1000: (17379H X 1000 / 8713182277956)
Reel à 500: (17379H X 500/20 / 8713182277963)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x70+3G16 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 3.150 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 2 PCE
Minimum order: standard trade article: 1000 MTR
Nominal cross section pe conductor: 16 mm²
Nominal equivalent cross section of reinforcement: 23 mm²
Number of pe conductors: 3
Standard trade article: (17379 / 8713182277949)

Part number: 17379
Description: 3 x 70 mm² + 3 G 16 mm²
Cores: 3
Approx. Outer diameter: 40,5 mm
Core Colors: Brown - black - grey - green / yellow - green / yellow - green / yellow
Net weight (k: 3,903 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 324 mm
Bending radius during installation: 486 mm
Binde: FRNC filler
Capacity: 73 nF/km
Conductor AC resistance at maximum continuous temperature: 0,34 Ohm/km
Conductor dc resistance @ 20°c: 0,272 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 10,6 mm
Diameter over braiding: 35,9 mm
Diameter shield wires: 0,4 mm
Inductance: 0,2 mH/km
Insulation thickness: 1,1 mm
Nominal cross section conductor: 70 mm²
Nominal outer sheath thickness: 2,2 mm
Protective conductor: Yes
Reel à 1000: (17379H X 1000 / 8713182277956)
Reel à 500: (17379H X 500/20 / 8713182277963)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x70+3G16 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 3.150 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 2 PCE
Minimum order: standard trade article: 1000 MTR
Nominal cross section pe conductor: 16 mm²
Nominal equivalent cross section of reinforcement: 23 mm²
Number of pe conductors: 3
Standard trade article: (17379 / 8713182277949)

Part number: 17213
Description: 3 x 120 mm²
Cores: 3
Approx. Outer diameter: 44,7 mm
Core Colors: Brown - Black - Grey
Net weight (k: 5,124 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 179 mm
Bending radius during installation: 313 mm
Binde: FRNC filler
Capacity: 87 nF/km
Conductor AC resistance at maximum continuous temperature: 0,19 Ohm/km
Conductor dc resistance @ 20°c: 0,161 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 14 mm
Diameter over braiding: 33,9 mm
Diameter shield wires: 0,4 mm
Inductance: 0,192 mH/km
Insulation thickness: 1,2 mm
Nominal cross section conductor: 120 mm²
Nominal outer sheath thickness: 2,4 mm
Reel à 1000: (17213H X 1000 / 8713182210281)
Reel à 500: (17213H X 500/20 / 8713182210298)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x120 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 5.400 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Standard trade article: (17213 / 8713182210304)

Part number: 17213
Description: 3 x 120 mm²
Cores: 3
Approx. Outer diameter: 44,7 mm
Core Colors: Brown - Black - Grey
Net weight (k: 5,124 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 179 mm
Bending radius during installation: 313 mm
Binde: FRNC filler
Capacity: 87 nF/km
Conductor AC resistance at maximum continuous temperature: 0,19 Ohm/km
Conductor dc resistance @ 20°c: 0,161 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 14 mm
Diameter over braiding: 33,9 mm
Diameter shield wires: 0,4 mm
Inductance: 0,192 mH/km
Insulation thickness: 1,2 mm
Nominal cross section conductor: 120 mm²
Nominal outer sheath thickness: 2,4 mm
Reel à 1000: (17213H X 1000 / 8713182210281)
Reel à 500: (17213H X 500/20 / 8713182210298)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x120 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 5.400 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Standard trade article: (17213 / 8713182210304)

Part number: 17198
Description: 3 x 35 mm²
Cores: 3
Approx. Outer diameter: 26,5 mm
Core Colors: Brown - Black - Grey
Net weight (k: 1,61 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 111 mm
Bending radius during installation: 194 mm
Binde: FRNC filler
Capacity: 59 nF/km
Conductor AC resistance at maximum continuous temperature: 0,706 Ohm/km
Conductor dc resistance @ 20°c: 0,554 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 7,7 mm
Diameter over braiding: 24 mm
Diameter shield wires: 0,3 mm
Inductance: 0,211 mH/km
Insulation thickness: 0,9 mm
Nominal cross section conductor: 35 mm²
Nominal outer sheath thickness: 1,7 mm
Reel à 1000: (17198H X 1000 / 8713182205867)
Reel à 500: (17198H X 500/20 / 8713182205874)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x35 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 1.575 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Standard trade article: (17198 / 8713182205881)

Part number: 17198
Description: 3 x 35 mm²
Cores: 3
Approx. Outer diameter: 26,5 mm
Core Colors: Brown - Black - Grey
Net weight (k: 1,61 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 111 mm
Bending radius during installation: 194 mm
Binde: FRNC filler
Capacity: 59 nF/km
Conductor AC resistance at maximum continuous temperature: 0,706 Ohm/km
Conductor dc resistance @ 20°c: 0,554 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 7,7 mm
Diameter over braiding: 24 mm
Diameter shield wires: 0,3 mm
Inductance: 0,211 mH/km
Insulation thickness: 0,9 mm
Nominal cross section conductor: 35 mm²
Nominal outer sheath thickness: 1,7 mm
Reel à 1000: (17198H X 1000 / 8713182205867)
Reel à 500: (17198H X 500/20 / 8713182205874)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x35 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 1.575 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Standard trade article: (17198 / 8713182205881)

Part number: 17199
Description: 3 x 50 mm²
Cores: 3
Approx. Outer diameter: 31,1 mm
Core Colors: Brown - Black - Grey
Net weight (k: 2,299 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 125 mm
Bending radius during installation: 218 mm
Binde: FRNC filler
Capacity: 61 nF/km
Conductor AC resistance at maximum continuous temperature: 0,49 Ohm/km
Conductor dc resistance @ 20°c: 0,386 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 9 mm
Diameter over braiding: 27,3 mm
Diameter shield wires: 0,3 mm
Inductance: 0,212 mH/km
Insulation thickness: 1 mm
Nominal cross section conductor: 50 mm²
Nominal outer sheath thickness: 1,9 mm
Reel à 1000: (17199H X 1000 / 8713182205898)
Reel à 500: (17199H X 500/20 / 8713182205904)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x50 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 2.250 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Nominal equivalent cross section of reinforcement: 18 mm²
Standard trade article: (17199 / 8713182205911)

Part number: 17199
Description: 3 x 50 mm²
Cores: 3
Approx. Outer diameter: 31,1 mm
Core Colors: Brown - Black - Grey
Net weight (k: 2,299 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 125 mm
Bending radius during installation: 218 mm
Binde: FRNC filler
Capacity: 61 nF/km
Conductor AC resistance at maximum continuous temperature: 0,49 Ohm/km
Conductor dc resistance @ 20°c: 0,386 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 9 mm
Diameter over braiding: 27,3 mm
Diameter shield wires: 0,3 mm
Inductance: 0,212 mH/km
Insulation thickness: 1 mm
Nominal cross section conductor: 50 mm²
Nominal outer sheath thickness: 1,9 mm
Reel à 1000: (17199H X 1000 / 8713182205898)
Reel à 500: (17199H X 500/20 / 8713182205904)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x50 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 2.250 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Nominal equivalent cross section of reinforcement: 18 mm²
Standard trade article: (17199 / 8713182205911)

Part number: 17178
Description: 3 x 70 mm²
Cores: 3
Approx. Outer diameter: 36,4 mm
Core Colors: Brown - Black - Grey
Net weight (k: 3,06 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 146 mm
Bending radius during installation: 255 mm
Binde: FRNC filler
Capacity: 73 nF/km
Conductor AC resistance at maximum continuous temperature: 0,34 Ohm/km
Conductor dc resistance @ 20°c: 0,272 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 10,6 mm
Diameter over braiding: 32,2 mm
Diameter shield wires: 0,3 mm
Inductance: 0,2 mH/km
Insulation thickness: 1,1 mm
Nominal cross section conductor: 70 mm²
Nominal outer sheath thickness: 2 mm
Reel à 1000: (17178H X 1000/30 / 8713182239183)
Reel à 500: (17178H X 500/20 / 8713182239190)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x70 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 3.150 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Nominal equivalent cross section of reinforcement: 25 mm²
Standard trade article: (17178 / 8713182239176)

Part number: 17178
Description: 3 x 70 mm²
Cores: 3
Approx. Outer diameter: 36,4 mm
Core Colors: Brown - Black - Grey
Net weight (k: 3,06 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 146 mm
Bending radius during installation: 255 mm
Binde: FRNC filler
Capacity: 73 nF/km
Conductor AC resistance at maximum continuous temperature: 0,34 Ohm/km
Conductor dc resistance @ 20°c: 0,272 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 10,6 mm
Diameter over braiding: 32,2 mm
Diameter shield wires: 0,3 mm
Inductance: 0,2 mH/km
Insulation thickness: 1,1 mm
Nominal cross section conductor: 70 mm²
Nominal outer sheath thickness: 2 mm
Reel à 1000: (17178H X 1000/30 / 8713182239183)
Reel à 500: (17178H X 500/20 / 8713182239190)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x70 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 3.150 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Nominal equivalent cross section of reinforcement: 25 mm²
Standard trade article: (17178 / 8713182239176)

Part number: 55908
Description: 3 x 95 mm² + 3 G 16 mm²
Cores: 3
Approx. Outer diameter: 43,7 mm
Core Colors: Brown - black - grey - green / yellow - green / yellow - green / yellow
Net weight (k: 4,738 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 345 mm
Bending radius during installation: 518 mm
Binde: FRNC filler
Capacity: 83 nF/km
Conductor AC resistance at maximum continuous temperature: 0,24 Ohm/km
Conductor dc resistance @ 20°c: 0,206 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colour
Diameter conductor: 12,4 mm
Diameter over braiding: 38,3 mm
Diameter shield wires: 0,4 mm
Inductance: 0,198 mH/km
Insulation thickness: 1,1 mm
Nominal cross section conductor: 95 mm²
Nominal outer sheath thickness: 2,3 mm
Protective conductor: Yes
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x95+3G16 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 4.995 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: standard trade article: 1000 MTR
Nominal cross section pe conductor: 16 mm²
Number of pe conductors: 3
Standard trade article: (55908 / 8713182398088)

Part number: 55908
Description: 3 x 95 mm² + 3 G 16 mm²
Cores: 3
Approx. Outer diameter: 43,7 mm
Core Colors: Brown - black - grey - green / yellow - green / yellow - green / yellow
Net weight (k: 4,738 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 345 mm
Bending radius during installation: 518 mm
Binde: FRNC filler
Capacity: 83 nF/km
Conductor AC resistance at maximum continuous temperature: 0,24 Ohm/km
Conductor dc resistance @ 20°c: 0,206 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colour
Diameter conductor: 12,4 mm
Diameter over braiding: 38,3 mm
Diameter shield wires: 0,4 mm
Inductance: 0,198 mH/km
Insulation thickness: 1,1 mm
Nominal cross section conductor: 95 mm²
Nominal outer sheath thickness: 2,3 mm
Protective conductor: Yes
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x95+3G16 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 4.995 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: standard trade article: 1000 MTR
Nominal cross section pe conductor: 16 mm²
Number of pe conductors: 3
Standard trade article: (55908 / 8713182398088)

Part number: 17195
Description: 3 x 95 mm²
Cores: 3
Approx. Outer diameter: 40,5 mm
Core Colors: Brown - Black - Grey
Net weight (k: 4,085 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 162 mm
Bending radius during installation: 284 mm
Binde: FRNC filler
Capacity: 83 nF/km
Conductor AC resistance at maximum continuous temperature: 0,24 Ohm/km
Conductor dc resistance @ 20°c: 0,206 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 12,4 mm
Diameter over braiding: 36,1 mm
Diameter shield wires: 0,4 mm
Inductance: 0,198 mH/km
Insulation thickness: 1,1 mm
Nominal cross section conductor: 95 mm²
Nominal outer sheath thickness: 2,2 mm
Reel à 1000: (17195H X 1000/30 / 8713182129149)
Reel à 500: (17195H X 500/20 / 8713182129156)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x95 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 4.275 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Standard trade article: (17195 / 8713182129163)

Part number: 17195
Description: 3 x 95 mm²
Cores: 3
Approx. Outer diameter: 40,5 mm
Core Colors: Brown - Black - Grey
Net weight (k: 4,085 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 162 mm
Bending radius during installation: 284 mm
Binde: FRNC filler
Capacity: 83 nF/km
Conductor AC resistance at maximum continuous temperature: 0,24 Ohm/km
Conductor dc resistance @ 20°c: 0,206 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 12,4 mm
Diameter over braiding: 36,1 mm
Diameter shield wires: 0,4 mm
Inductance: 0,198 mH/km
Insulation thickness: 1,1 mm
Nominal cross section conductor: 95 mm²
Nominal outer sheath thickness: 2,2 mm
Reel à 1000: (17195H X 1000/30 / 8713182129149)
Reel à 500: (17195H X 500/20 / 8713182129156)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 3x95 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 4.275 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 1 PCE
Minimum order: standard trade article: 1 MTR
Standard trade article: (17195 / 8713182129163)

Part number: 17432
Description: 4 G 50 mm²
Cores: 4
Approx. Outer diameter: 34 mm
Core Colors: Green/Yellow - Brown - Black - Grey
Net weight (k: 2,853 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 136 mm
Bending radius during installation: 238 mm
Binde: FRNC filler
Capacity: 70 nF/km
Conductor AC resistance at maximum continuous temperature: 0,49 Ohm/km
Conductor dc resistance @ 20°c: 0,386 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 9 mm
Diameter over braiding: 30 mm
Diameter shield wires: 0,3 mm
Inductance: 0,212 mH/km
Insulation thickness: 1 mm
Nominal cross section conductor: 50 mm²
Nominal outer sheath thickness: 2 mm
Reel à 1000: (17432H X 1000 / 8713182391751)
Reel à 500: (17432H X 500/20 / 8713182391768)
Ripcord: Yes
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 4G50 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 3.000 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 2 PCE
Minimum order: standard trade article: 1000 MTR
Nominal equivalent cross section of reinforcement: 19 mm²
Standard trade article: (17432 / 8713182391744)

Part number: 17432
Description: 4 G 50 mm²
Cores: 4
Approx. Outer diameter: 34 mm
Core Colors: Green/Yellow - Brown - Black - Grey
Net weight (k: 2,853 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 136 mm
Bending radius during installation: 238 mm
Binde: FRNC filler
Capacity: 70 nF/km
Conductor AC resistance at maximum continuous temperature: 0,49 Ohm/km
Conductor dc resistance @ 20°c: 0,386 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 9 mm
Diameter over braiding: 30 mm
Diameter shield wires: 0,3 mm
Inductance: 0,212 mH/km
Insulation thickness: 1 mm
Nominal cross section conductor: 50 mm²
Nominal outer sheath thickness: 2 mm
Reel à 1000: (17432H X 1000 / 8713182391751)
Reel à 500: (17432H X 500/20 / 8713182391768)
Ripcord: Yes
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 4G50 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 3.000 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 2 PCE
Minimum order: standard trade article: 1000 MTR
Nominal equivalent cross section of reinforcement: 19 mm²
Standard trade article: (17432 / 8713182391744)

Part number: 17214
Description: 4 x 95 mm²
Cores: 4
Approx. Outer diameter: 44,6 mm
Core Colors: Blue - Brown - Black - Grey
Net weight (k: 5,224 kg/m
Type: MarineFlex YOZp EMC 0,6/1 kV
Standardization: IEC 60092-350/-360/-353
Conductor material: Copper
Conductor surface: Bare
Conductor category: Class 5 = flexible
Core insulation: Crosslinked polyethylene (XLPE)
Flame retardant: IEC 60332-1 / IEC 60332-3-22 Cat. A
Permitted cable outer temperature, fixed: -40 / 70 °C
Max. conductor temperature: 90 °C
Nominal voltage U0: 0,6 kV
Nominal voltage U: 1 kV
Test voltage: 3,5 kV
Colour outer sheath: Black
Product group: Power cable >= 1 kV, for permanent installation
Application: Lightweight, armoured, flexible low voltage power cables for power and lighting applications in all ship areas where EMC protection is needed.
Installation temperature: -20 / 50 °C
Transportation and storage temperature: -40 / 50 °C
UV-protection: NEN EN 50289-4-17A
UV resistant: Yes
Material outer sheath: Flame Retardant Halogen Free Polyolefin Compound
Halogen free (acc. EN 60754-: IEC 60754-1/2
Low smoke (acc. EN 61034-2): IEC 61034-2
Bending radius after installation: 179 mm
Bending radius during installation: 313 mm
Binde: FRNC filler
Capacity: 86 nF/km
Conductor AC resistance at maximum continuous temperature: 0,24 Ohm/km
Conductor dc resistance @ 20°c: 0,206 Ohm/km
Construction outer shield: EMC-screen consists of Cu/PET-tape and tinned copper braiding
Core identification: Colours and numbers
Diameter conductor: 12,4 mm
Diameter over braiding: 39,8 mm
Diameter shield wires: 0,4 mm
Inductance: 0,198 mH/km
Insulation thickness: 1,1 mm
Nominal cross section conductor: 95 mm²
Nominal outer sheath thickness: 2,4 mm
Reel à 1000: (17214H X 1000 / 8713182213855)
Reel à 500: (17214H X 500/20 / 8713182213862)
Screening: Yes
Shape of conductor: Round
Sheath marking: {Length} 0000 TKF - MarineFlex YOZp EMC 0,6/1 kV - 4x95 mm² +90 º C - LSHF - IEC 60092-353, 60332-3-22 - {Batch}
Standardization conductor material: IEC 60228
Tensile load: 5.700 N
Uv rating: Very good / Test duration >= 6000 h
Characteristics: • Class 5 conductors • Easy installation in tight spaces due to flexible conductors • Halogen-free and low smoke, flame retardant • Tinned copper wire braid armouring • A combined screen of copper-pet tape and tinned copper wire braid for optimal screening • Different colour outer sheaths, other than black, available on request • DC voltage: 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Conductor coding in accordance with hd 308 s2: Yes
Dc voltage (stated in description): 0,9/1,5 kV (if voltage to earth does not exceed 0,9 kV)
Minimum order: reel à 1000: 1 PCE
Minimum order: reel à 500: 2 PCE
Minimum order: standard trade article: 1000 MTR
Standard trade article: (17214 / 8713182213879)